1 833 UCYACHT (829 2248)
By United City Yachts - Canada's Yacht Sales Network
Join those who have experienced true Freedom

CONTACT GEORGIAN BAY YACHT SALES. 1 833 UCYACHT (829 2248)

Contact Us


Add to Watch List

38' 1982 C&C Landfall 38

Type: Sailboat
Year: 1982
Make: C&C
Model: Landfall 38
Length: 38'
Status: For Sale
Price: $ 39,900
Location: Kingston, Ontario
Date Posted: 2017-06-14
Broker Email: adrian@kingstonyachtsales.com

Contact the Broker

Red fields are required

LOCATION: KINGSTON, ONTARIO

 

C&C Yachts of Ontario Canada, with a reputation for competitive racers and racer/cruisers, is not exactly the first name that pops into most folk's minds when thinking of a cruising sailboat, so the Landfall 38 may surprise some. The Landfall series was C&C's first attempt to build a large production boat with the emphasis on cruising, as opposed to the racer/cruisers on which C&C had built its reputation. The Landfall 38 was first introduced in 1979 and continued in production until 1985.

This Landfall 38 has an extensive cruising history proving herself very sea worthy.  This vessel has some upgrades and can be considered custom.  After 36 years, Capella needs a new family. She has many upgrades – full enclosure, new cushions, heavy chain ground tackle and anchors, electric windlass, bow sprit and radar arch, solar panels, autopilot, new hatches and ports, overhauled W-40 diesel, rebuilt rudder, mast step & lifelines, 2x10 lb fibreglass propane tanks, cockpit floor grate, macerator. Exhaustive inventory of spare parts, manuals, records. 

Call Adrian - 613 985 3600

 

Additional Specs, Equipment and Information:


Specs
Keel: Fin

Dimensions
LOA: 38 ft 0 in
Beam: 12 ft 0 in
Maximum Draft: 4 ft 11 in
Displacement: 16900 lbs

Tanks
Fuel Tanks: (113 Gallons)


Engine

Make: Westerbeke 40 (Perkins 4-10), 40-50 hp 

Fuel: Diesel

Transmission – Paragon Hydraulic P21M1, V drive – Walter

 

***Note: This is an upgraded option from the typical small 27 hp engine in other landfalls


Upgrades and spares

Upgrades

1981 - canary yellow hull painted Awlgrip off-white, G-8010, Nova Scotia

1982 - teak toerail repaired and minor hull scratches repaired, Nova Scotia, cockpit floor reinforced (C&C Custom Shop, Oakville, ON)

1983 - new mainsail and 155% genoa, new StreamStay I furler, new Westerbeke 40 (Perkins 4-108) diesel, original failed upon 200 nm delivery due to poor commissioning, includes all engine and parts manuals,

1984 - new Navtangs and mast pins, due to salt in mast during winter delivery, new DF 100/200 motor mounts, Windex,

1985 – routine maintenance,

1986 - Al backing plates inside of all accessible stanchion bases, new dodger, Forespar whisker pole and mast fitting,

1987 - repaired SS aft boarding ladder, complete rudder rebuild, closed cell foam, rudder length reduced 3”, now bottom is higher than keel base, 2x75W solar semi-flexible solar panels on deck (later removed), Surrette house battery (last 17 years), AquaSignal Masthead light,

1988 – replaced SR Mariner depth with Autohelm ST50,

1989 - replaced all running rigging,

1990 - replaced tall Dorade vents with short profile vents

1991 - installed outboard motor lift and aft pad and keel slot for 15 hp Yamaha ob,

1992 – replaced mast boot, Windex

1993 – installed auxillary hinged chart table

1994 - installed masthead crane for HF antennae

1995 – refinished cabin sole, razor cut for removal, hold down bolts, refinished inside gelcoat – grey to white, cut extra hatcheds behind back cushions and under cushions to access storage,

1996 - striped all antifouling to original yellow gelcoat, added 7 coats Interprotect 2000 and CSC antifouling

1997 - custom bowsprit and rollers (allows 2 large anchors stowed outside of pulpit, away from forestay), custom radar arch and wind generator pole. All 1 1/8” SS. Thru bolted into aft teak rails and bow. Al backing plates bedded with West Epoxy thick filler, Link 2000R battery and electrical monitor, regulator, Freedom 20 inverter charger, hi current safety sw and fuses. 6 x 6V Trojan T-125 house batteries, Lofrans Leopard 1200W electric anchor windlass, up down deck foot controls, vertical chain and rope gypsy, individual locker lids and fore and aft divided chain lockers, two hawse holes allows immediate deployment of both anchors and chain, 220 ft 5/8” chain, 35 and 25 lb CQR anchors, SS anchor swivel, 250‘ ½” nylon braid anchor rode, 220’ 5/16” G-4 hi tensile anchor chain, 300 ft ½” braid nylon anchor rode, 35 lb and 25 lb CQR plow anchors,

1998 – replaced original fridge controller with solid state board bulkhead mounted controller, new 140% genoa and #4 jib, 3rd reef in mainsail, reinforced stress points

1998, Genco Sunbrella dodger, transition piece, bimini with 1” SS supports, windows with screens and solid covers. Clear windshield. Cockpit mounts are to top of teak rail allowing easy and fast deck access, under seat propane lockers ( 2 x 10lb), sealed lockers with drains, 2 stage propane regulator to original solenoid. Installed propane leak sensor. Large access hatch to lazarette, installed 2 removable shelves for stores. Easy access to exhaust hose, rudder quadrant and rudder tube grease fitting for maintenance and inspection,

1998 – installed Y valve and macerator pump, anchor wash pump, freshwater cockpit shower fitting, Nicro Solar Vent fan in fwd cabin top, 3 x 75Watt Siemens solar panels mounted on radar arch and on standoff SS rails above bimini, Trace solar controller, Air Marine 403 wind generator (removed in 2005) on pole tied into arch and wired into 12 V system. Wiring remains, 125A Balmar (West) 91-125 14 pole, single belt alternator. Original to spares,

1999 – complete cabin to dodger tan shade cover with fibreglass inserts, fwd main hatch shade/rain cover, replaced 1/4hr fridge fan motor with low current computer motor, ducted fan to evapourator, bilge external drain plug, new VHF radio and antennae, replaced wind generator and 1 solar panel (hurricane Floyd, Bahamas, on the hard),

2000 – West Marine Battery Combiner, links engine battery to 2 house banks during AC shore charging, replaced freshwater intake pump, rebuilt old – to spares, replaced SR Mariner wind with WS 150 wind – masthead and readout, hull repainted with Awlgrip, name and seagull decals replaced, exterior brightwork refinished, digital file for computer generation of decals,

2001 – installed 3 new stanchion bases, remainder in spares, lazy jacks on main (boom to mast, 3 part), replaced all in mast wiring, checked all rod rigging, replaced StreamStay I furler bearings, green Sunbrella covers for Dorade boxes, teak toe rail (summer storage) and teak deck hand rails, new upper lifelines, and gate Pelican hooks,

2002 – doubled main track car, replaced genoa blocks, installed Barber hauler blocks on genoa tracks (to avoid sheets hitting dodger during furling), removed, inspected transmission, V drive, replaced hoses and damper plate, new cutlass bearing,

2003 – new engine mounts (DF2200 rear, DF 100/200 fwd), new Al L mount plates at rear, new prop shaft, bronze backing plates for rebidded and aligned strut, replaced Wilcox-Crittenden head with Jabsco, replace head to tank and tank to Y valve hoses, cockpit drain hoses and new ball drain valves to replace old gate valves,

2004 – replaced main dodger Lexan window with Statglass, replaced oil filter hose and W-40 headgasket, valves ground, head retorqued, fibreglass AquaLift muffler and floor, installed Racor 500 primary fuel filter and drain hose,

2005 – replaced raw seawater strainer and intake valve (under floor) with Forespar Marelon 906066, rebuilt WS 150 wind, reglassed port window openings, replaced all side ports, bolts, and bedding, regalvanized 35 lb plow and 220’ anchor chain,

2006 - new StreamStay furler bearings, Interlux Brightside paint to sides of cabin top, replaced Nicro solar vent unit,

2007 - masthead TV antenna, C&C “smile” cured ( mast step cavity accessed, wet plywood filler removed (manufacturing error) and replaced with fibreglass pieces embedded into West Epoxy structural filler, cavity “hatch” reglassed, drain from fwd of mast to lower bilge installed, likely one of only a few C&Cs that have had this common error corrected),

2008 - Autohelm 4000 control unit replaced, old repairable and in spares with extra wheel unit,

2009 – cockpit grating (4 piece, 5/8” mahogany, saturated in West Epoxy, locks in place, non slip), rebuilt SR Mariner log,

2010 – replaced Al diesel tank (another typical C&C problem due to bedding in open celled foam which eventually causes pit corrosion and leaks), cut out corroded parts, reinforce tank, added side angle arms for mounting to rubberized cleats fibreglassed to floor, reglassed retaining bulkhead – no leaks, installed new custom exhaust injector elbow, installed keyed parallel switch for house to engine batts,

2011 – new interior cushions and foam ($5800), stored inside each winter, have use covers, new hatch plexiglass (head, galley, main) and new mid hatch, new Trojan T-125 house batteries,

2012 - enclosure zippers replaced, resewn, new Statglass in main dodger window

2013 - replaced main muffler to exhaust hose, new diesel fill hose

2014 – new fibreglass propane tanks, new multistage regulator, new pressure valve, new propane BBQ, new Lofrans anchor windlass solenoid control box, rebuilt windlass support beam, new square SS water heater (Kuuma 11811),

2015 –removed Freedom 20 inverter charger, replaced with Noco Genius G3 3 bank solid state charger,

2016 – rebuilt Nicro solar fan, new battery, custom wooden inside hatch screen inserts, replaced chain wear plate fwd of windlass, rebuilt and repainted propane locker seat extensions, replaced engine battery

2017 – replaced rear engine seal, new R&D damper plate, checked and repaired all mast lites and wiring, refinish cockpit grate, resew a bimini zipper seam, clean anchor control foot switches, rewire fwd running lights

 

Spare Parts

  1. Spare heat exchanger for Westerbeke 40 (Perkins 4-108) diesel engine, 1 small repairable hole in a tube end, spare oil heat exchanger for transmission
  2. Spare Autohelm 4000 drive motor and wheel, Autohelm control unit,
  3. 2 new motor mounts, Dual Flex Marine and Industrial, DF – 2200 – C, -2 series now reco’d for Perkins 4-108 or W40. Previously were installed with DF-100 series, slightly smaller vertical height mounts,
  4. Motorola B-17 55A alternator with external mounted regulator,
  5. Danfoss compressor for Adler Barbour fridge,
  6. W-40 valve cover gaskets,
  7. Spare Jabsco freshwater pump, rebuilt,
  8. Many others, list updated after inventory, after July 10

Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. 

 

My Watch List